RC Plane Remote Control Airplane - PLRB Toys 2.4Ghz 2 Channels DIY RC Airplane Radio Control Cessna 182 Aircraft EPP Foam Glider Toys (Two Batteries)

- This RC plane is design from Cessna 182 which airpcraft is most popular in the world. - EPP foam 2 channels 2.4Ghz RC airplane , The weight of taking off is 38g and it was made of EPP foam material. Come with one extra battery, The total playing time can be 24mins. . - The unique technology helps beginner pilot easy to flight. It is related to 3 axis Gyroscope building in ESC, which makes this plane flights stable automatic. Either experts or beginners, who are able to handling it easy. - Half DIY design packing RC plane, You can find your funny when assemble this remote control airplane. Durable EPP foam protects the airplane from air crashing, also protects body and wing all are in good condition from curving during transportation. - As its less weight, two coreless 716 motors support enough power to fly in the sky. Two methods of taking off ( throw off or sliding off ) brings amazing flight route when the wing speed less than 5meter per second for pilot.

Product description

New 2 Channels 2.4Ghz Remote Control Cessna 182 Airplane .

WARNING: Please always use corresponding adapter ( 0.5-1A) to connect USB cable to charge the robot ( USB Cable tech data: Input: 5V 0.5-1A Output: DC4.2V - 350mA )

Pay attention to insert the socket while connecting the motor wires with PCB board. Please always insert using "WHITE" with "WHITE" color and "RED" with "RED" color.

Notice:

Airplane is 50% assembled Kits from Unbox. Pilot need to complete last procedures for making their own Cessna RC plane by following up our steps in instruction manual.

The aircraft must put on a flat ground when start to connect aircraft with transmitter. Turn on transmitter then turn on plane then put it on flat gruond.

The radio control rage is 80m, Don't fly it out of range.

Hope you will enjoy to building your sky dream.

Specification:

Material: EPP foam

Wingspan: 380mm ; Length: 335mm

Motor: 2pcs(1 clockwise running, 1 anticlockwise running, middle propeller is decoration part only no funnction) Coreless 716A

Battery: 3.7V 300mAh Lipo battery

Taking off Weight: 50g

Flying Time: 12mins

Charging Time: about 40mins

Remote Control: 2.4Ghz 2Channels

Radio control Range: 80m

Features:

move forward, up/down, turn left/right

EPP foam, light weight and durable.

Smoothly body design, Kits simple assembling procedure enable you to build your own airplane.

Efficiency 716A coreless motor support your plane lasting a long time flight.

Thanks to 3-axis gyroscope system, which have this airplane flights more stable and easy, suitable for beginners.

Notice:

The aircraft must put on a flat ground when start to connect aircraft with transmitter. Turn on transmitter then turn on plane then put it on flat gruond.

The radio control rage is 80m, Don't fly it out of range.

Includes:

1 x Half-assembled DIY plane

1 x transmitter

2x 1S Lipo battery

1 x USB cable

3 sets x Spare Propellers

2 x landing gear

Remind:

Transmitter requires AA battery (Not included)

Please Install the propeller slowly and gently by hand.

Please don’t fly the RC plane when the wing speed is more than 5 meters per second.

Please face the wing coming direction when you start fly plane.

Please read the manual and check the sticker on the gift box, watch the video from link before assemble.